Urgent help

[yuntian]

14:20:13.223: [Media Source 'media source']: settings:
14:20:13.223: input: rtmp://。。。。。。。。
14:20:13.223: input_format:
14:20:13.223: speed: 100
14:20:13.223: is_looping: no
14:20:13.223: is_hw_decoding: no
14:20:13.223: is_clear_on_media_end: no
14:20:13.223: restart_on_activate: no
14:20:13.223: close_when_inactive: no
14:22:12.317: [Media Source 'media source']: settings:
14:22:12.317: input: rtmp://。。。。。。。
14:22:12.317: input_format:
14:22:12.317: speed: 100
14:22:12.317: is_looping: no
14:22:12.317: is_hw_decoding: yes
14:22:12.317: is_clear_on_media_end: no
14:22:12.317: restart_on_activate: no
14:22:12.317: close_when_inactive: no
14:26:21.625: executable: PotPlayerMini64.exe
14:26:21.625: method selected: Automatic
14:26:21.625: method chosen: BitBlt
14:26:21.625:
14:26:25.458: executable: PotPlayerMini64.exe
14:26:25.458: method selected: BitBlt
14:26:25.458: method chosen: BitBlt
14:26:25.458:
14:26:25.991: executable: PotPlayerMini64.exe
14:26:25.991: method selected: BitBlt
14:26:25.991: method chosen: BitBlt
14:26:25.991:
14:28:53.097: [Media Source 'media source']: settings:
14:28:53.097: input: rtmp://。。。。。
14:28:53.097: input_format:
14:28:53.097: speed: 100
14:28:53.097: is_looping: no
14:28:53.097: is_hw_decoding: yes
14:28:53.097: is_clear_on_media_end: no
14:28:53.097: restart_on_activate: no
14:28:53.097: close_when_inactive: no
--------------------------------------------------------------------------------------------------------
My media source will get stuck when streaming. I checked the parameter setting of streaming signal before, but it will get stuck when streaming in OBS. Thank you very much.

 

[WBE]

It appears that you selected some log file lines for your forum post. Please share the complete log instead:

Please post a log with your issue! Here's how...

OBS Studio creates a log file each time you run it which contains very useful diagnostic information. Without a log file, it's much harder for any support volunteers to figure out problems and your post may be ignored. To upload a log file, go to the Help menu > Log Files > Upload Last Log...

obsproject.com

 

[yuntian]

您似乎为论坛帖子选择了一些日志文件行。请改为分享完整的日志：

Please post a log with your issue! Here's how...

OBS Studio creates a log file each time you run it which contains very useful diagnostic information. Without a log file, it's much harder for any support volunteers to figure out problems and your post may be ignored. To upload a log file, go to the Help menu > Log Files > Upload Last Log...

obsproject.com

[/引用]
感谢你的回复。相关问题已经找到。