No GPU driver available

DamD

New Member
H.642 인코딩을 원하지만,

스트리밍을 시작하지 못했습니다.
출력 시작에 실패했습니다. 자세한 내용은 로그를 확인하십시오.
참고: NVENC 또는 AMD 인코더를 사용하는 경우 비디오 드라이버가 최신인지 확인하십시오.

PC
CPU: amd 라이젠7 3700x
GPU: 엔비디아 지포스 RTX 2070 슈퍼

1688065883983.png


GPU가 있지만 obs 비디오 인코더가 GPU를 인식하지 못합니다.
그래서 드라이버와 obs를 다시 설치했지만 여전히 문제가 지속됩니다.

1688065696823.png


로그를 분석한 결과 Microsoft Basic Render Driver만 인식됨을 확인했습니다.

1688066200090.png
1688066433119.png


전에는 이런 문제가 없었는데 갑자기 발생하네요
내가 그것을 고치는 방법
 

Attachments

  • 2023-06-30 03-50-02.txt
    8.4 KB · Views: 65
Last edited:

DamD

New Member
H.642 encoding is desired,

Failed to start streaming.
Failed to start output. Check the logs for more information.
Note: If you are using NVENC or AMD encoders, make sure your video driver is up to date.

PC
CPU: amd Ryzen7 3700x
GPU: Nvidia GeForce RTX 2070 Super

1688067364072.png


I have a GPU, but the obs video encoder does not recognize the GPU.
So I reinstalled the driver and obs, but the problem still persists.

1688067352762.png


An analysis of the logs confirmed that only the Microsoft Basic Render Driver was recognized.
1688067333208.png
1688067342397.png


I didn't have this problem before, but it just happened
How I fix it
 

R1CH

Forum Admin
Developer
Make sure your monitors are connected to the GPU, not the motherboard. Then do a clean driver install.

 

DamD

New Member
Make sure your monitors are connected to the GPU, not the motherboard. Then do a clean driver install.

Thank you for your reply
But the monitor is connected to the GPU + clean driver
1688105514107.png

The connection with other apps is working fine.
1688105986514.png
1688106176440.png

Problem only occurs on OBS
 

Suslik V

Active Member
...
03:50:05.898: QuickWriteFile: Failed to open file 'C:\Users\담\AppData\Roaming\obs-studio\updates\branches.json': Illegal byte sequence
03:50:05.898: AutoUpdateThread::run: Could not write file 'C:\Users\담\AppData\Roaming\obs-studio\updates\branches.json'
...
Is way more interesting here.

What last version of OBS you had before you updated to v29.1.3?

Edit:
It seems that this part of the issue now has a fix: https://github.com/obsproject/obs-studio/pull/9183
 
Last edited:

DamD

New Member
Top