ENCODING OVERLOAD

Castro1477

New Member
I havent had this issue in a long time but eversince BO6 came out ive been getting a lot of encoding overload and losing a lot of frames. I have my graphics settings on low and still have issues. I tried loweing my streaming and recording quality but im still having the same issues. Any help will be greatly appreciated.

 

Suslik V

Active Member
Code:
03:07:27.617:  ┃ ┃ ┗download_frame: min=0 ms, median=3.345 ms, max=102.077 ms, 99th percentile=18.929 ms
I'm not a best specialist in high end hardware, but ~19ms for download frame time - isn't it too much for the 60 fps? Do you have some other devices on the same bus where your video card connected?

Or this is because it was encoded with very slow preset:
Code:
21:25:59.682:     preset:       p6
maybe worth to try higher preset (lower "p#")?
 

Castro1477

New Member
Code:
03:07:27.617:  ┃ ┃ ┗download_frame: min=0 ms, median=3.345 ms, max=102.077 ms, 99th percentile=18.929 ms
I'm not a best specialist in high end hardware, but ~19ms for download frame time - isn't it too much for the 60 fps? Do you have some other devices on the same bus where your video card connected?

Or this is because it was encoded with very slow preset:
Code:
21:25:59.682:     preset:       p6
maybe worth to try higher preset (lower "p#")?
I usually ran on the slowest preset for both stream and recording for this stream I lowered it to slower p6 to see if it helped but I was still having issues. For some reason my time to render frame keeps getting high that’s when I get the encoding overload. I have the specs to run everything so I’m not sure why it’s doing that
 

Suslik V

Active Member
You always can try software encoder to see if download frame time changes at all. If not - likely configuration issue of the equipment connected to the motherboard (maybe some slots sharing the same bus etc). Unlikely that this issue differ much from previous one, despite newer video card.
 
Top